MacDon M155 Unloading And Assembly Instructions page 156

Menu Item Scroll Forward: Displays value under menu item.
•
Push to scroll forward
•
Hold down for fast scroll
Menu Item Scroll Backward: Displays value under menu item.
•
Push to scroll backward
•
Hold down for fast scroll
Program Switch: Places monitor into Program Mode. Press while pressing select switch.
NOTE:
The following menus are available when ignition key is set to RUN:
•
WINDROWER SETUP
•
CAB DISPLAY SETUP
•
DIAGNOSTIC MODE
The CALIBRATE SENSORS menu is available only when engine is running.
6. Fast scroll applies only when changing KNIFE SPEED, OVERLOAD PRESSURE, and TIRE SIZE.
214298
CAB DISPLAY MODULE (CDM)
6
6
144
Revision A