Checking Engine Air Intake - MacDon M155 Unloading And Assembly Instructions

5.4 Checking Engine Air Intake

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Ensure air cleaner cap is firmly attached and latches (A)
and clamps (B) are secure.
2. M155 only: Check the constant torque spring clamp (A)
at the back of the air cleaner. Hold a 0.46 mm
(0.018 in.) gauge between the middle coils, tighten the
clamp until the gauge is snug, and remove the gauge.
214298
PERFORMING PREDELIVERY CHECKS
219
Figure 5.4: M205 Air Intake System
Figure 5.5: M155 Air Intake System
Figure 5.6: M155 Air Intake System
Revision A