MacDon M155 Unloading And Assembly Instructions page 91

5. Remove the cutout by cutting the tabs (A) in the panel.
Remove sharp edges from the panel.
6. Position receptacle (A) (supplied with radio) into
opening and secure by bending tabs (B) on receptacle
against panel.
7. Insert radio into receptacle and attach radio bezel.
Ensure radio locks into position and faceplate (A) is
against the panel.
214298
ASSEMBLING THE WINDROWER
Figure 3.109: Panel
Figure 3.110: Radio Receptacle
Figure 3.111: Radio Installed
79
Revision A