M205 Self-Propelled Windrower
To operate a D Series header, the M205 Self-Propelled
Windrower must be equipped with a Draper Drive Basic kit
and a Completion kit.
Windrowers equipped with D Series hydraulics have four
header drive hoses on the left cab-forward side and up to
five reel drive hoses on the right side.
If necessary, obtain the following kits and install them in
accordance with the instructions supplied with the kits.
Kit Description
Base Draper/Auger Drive Kit
Draper Header Reel Drive
Completion Kit
Hydraulic Couplers Kit
Hydraulic Union Kit
To attach a D Series header to an M205, refer to the
following:
•
Attaching a D Series Header: Hydraulic Center-Link
with Optional Self-Alignment, page 88
•
Attaching a D Series Header: Hydraulic Center-Link
without Self-Alignment, page 94
214298
ASSEMBLING THE WINDROWER
Kit Number
MD #B5491
MD #B5496
MD #B5497
MD #166844
87
Figure 3.128: M205 Draper Header Drive
Hydraulics
Revision A