MacDon M155 Unloading And Assembly Instructions page 72

12. Ensure the front of the platform is contacting the
guide (A).
13. Adjust the platform horizontally with the 1/2 x 2-1/4 in.
bolt (A) as required.
14. Relocate the steering arm (A) into either of the other
holes on the bracket (B), if major adjustment is
required.
15. Tighten the three main beam attachment bolts to
108 Nm (80 lbf·ft).
16. Repeat procedure to install the right side platform.
214298
ASSEMBLING THE WINDROWER
Figure 3.75: Left Platform – Guide
Figure 3.76: Left Platform – Main Beam
Figure 3.77: Left Platform – Steering Arm
60
Revision A