MacDon M155 Unloading And Assembly Instructions page 45

4. Feed the hydraulic hose bundle (A) into the frame and
through the hole (B) at the center of the frame.
5. Insert the leg into the frame and line up the holes in the
frame and the leg at the first position (widest tread with
one exposed hole [A]).
6. Insert pins and secure with 3/4 x 16-1/2 in. long
bolts (B), washers, and nuts. Torque to 136 Nm
(100 lbf·ft).
7. Repeat for opposite leg.
214298
ASSEMBLING THE WINDROWER
Figure 3.10: Hydraulic Hoses
Figure 3.11: Leg Position on Frame
33
Revision A