MacDon M155 Unloading And Assembly Instructions page 82

13. Disconnect the electrical connection (A) at the fuel
pump on the right side of the engine.
14. Open the maintenance platform on the right
(cab-forward) side.
15. Open the circuit breaker/fuse box (A), and remove the
engine control module (ECM) ignition fuse (5A) (B).
CAUTION
Check to be sure all bystanders have cleared the area.
16. Prime the system by cranking the engine with the
starter for 15 seconds.
17. Reconnect the electrical connection at the fuel pump
and at the brake engage solenoid.
18. Reinstall ECM ignition fuse (5A) (B) and the circuit
breaker/fuse box (A).
19. Close the engine compartment hood.
214298
ASSEMBLING THE WINDROWER
Figure 3.97: Fuel Pump Location
Figure 3.98: Circuit Breaker/Fuse Box
70
Revision A