Theory of Operation
FieldFox Analyzer
LAN Interface
LAN Interface
See the "System Configuration" section of the FieldFox Analyzer User's Guide (Part Number
N9927-90001) for details on reviewing and configuring LAN settings.
The LAN interface supports Auto MDIX. When a LAN cable is connected to the FieldFox, if the other
end of the cable supports Auto MDIX, there is no need for a cross-over cable.
There are two LEDs on the LAN connector. When there is successful communication over a LAN cable,
both LEDs are active. If both LEDs are not active, consider using a cross-over cable.
5-30
N9927-90003