Using The Cli - TP-Link Jetstream T1500G-8T User Manual

Managing System
MAC ACL Rules
Combined ACL
Rules
IPv6 ACL Rules
IPv4 Source
Guard Entries
IPv6 Source
Guard Entries
7.2

Using the CLI

Follow these steps to configure the SDM template:
Step 1
Step 2
Step 3
Step 4
Step 5
The following example shows how to set the SDM template as enterpriseV4.
Switch#config
Switch(config)#show sdm prefer enterpriseV4
Downloaded from ManualsNet.com
Displays the number of Layer 2 ACL Rules.
Displays the number of combined ACL rules.
Displays the number of IPv6 ACL rules.
Displays the number of IPv4 source guard entries.
Displays the number of IPv6 source guard entries.
configure
Enter global configuration mode.
show sdm prefer { used | default | enterpriseV4 | enterpriseV6 }
View the template table. It will help you determine which template is suitable for your network.
used: Displays the resource allocation of the current template.
default: Displays the resource allocation of the default template.
enterpriseV4: Displays the resource allocation of the enterpriseV4 template.
enterpriseV6: Displays the resource allocation of the enterpriseV6 template.
sdm prefer { default | enterpriseV4 | enterpriseV6 }
Select the template that will be effective after the switch is rebooted.
default: Select the template of default. It gives balance to the IP ACL rules and MAC ACL rules.
enterpriseV4: Select the template of enterpriseV4. It maximizes system resources for IP ACL
rules and MAC ACL rules.
enterpriseV6: Select the template of enterpriseV4. It allocates resources to IPv6 ACL rules.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
search engine
SDM Template Configuration
User Guide 76