Igmp Snooping Configuration; Using The Gui; Configuring Igmp Snooping Globally - TP-Link Jetstream T1500G-8T User Manual

Configuring Layer 2 Multicast
2

IGMP Snooping Configuration

To complete IGMP Snooping configuration, follow these steps:
1) Enable IGMP Snooping globally and configure the global parameters.
2) Configure IGMP Snooping for VLANs.
3) Configure IGMP Snooping for ports.
4) (Optional) Configure hosts to statically join a group.
2.1

Using the GUI

2.1.1 Configuring IGMP Snooping Globally

Choose the menu L2 FEATURES > Multicast > IGMP Snooping > Global Config to load the
following page.
Figure 2-1 Configure IGMP Snooping Globally
Follow these steps to configure IGMP Snooping globally:
1) In the Global Config section, enable IGMP Snooping globally and configure the global
parameters.
Downloaded from ManualsNet.com
Note:
IGMP Snooping takes effect only when it is enabled globally, in the corresponding VLAN and port at
the same time.
IGMP Snooping Enable or disable IGMP Snooping globally.
search engine
IGMP Snooping Configuration
User Guide 215