Enabling Spanning Tree Globally - TP-Link Jetstream T1500G-8T User Manual

Configuring Spanning Tree

3.2.4 Enabling Spanning Tree Globally

Follow these steps to configure the spanning tree mode as MSTP and enable spanning tree
function globally:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
This example shows how to configure the spanning tree mode as MSTP and enable
spanning tree function globally :
Switch#configure
Switch(config)#spanning-tree mode mstp
Switch(config)#spanning-tree
Switch(config)#show spanning-tree active
Spanning tree is enabled
Spanning-tree's mode: MSTP (802.1s Multiple Spanning Tree Protocol)
Latest topology change time: 2006-01-04 10:47:42
MST-Instance 0 (CIST)
Root Bridge
Priority
Address
External Cost : 200000
Root Port
Designated Bridge
Downloaded from ManualsNet.com
configure
Enter global configuration mode.
spanning-tree mode mstp
Configure the spanning tree mode as MSTP.
mstp: Specify the spanning tree mode as MSTP.
spanning-tree
Enable spanning tree function globally.
show spanning-tree active
(Optional) View the active information of MSTP.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
: 32768
: 00-0a-eb-13-23-97
: Gi/0/20
search engine
MSTP Configurations
User Guide 336