TP-Link Jetstream T1500G-8T User Manual page 55

Managing System
2) Configure IPv6 global address of the interface via following three ways:
Via RA Message:
Via DHCPv6 Server:
Manually:
In the Global Address Config section, click
address to the interface.
Downloaded from ManualsNet.com
Status Displays the status of the link-local address. An IPv6 address cannot be used
before pass the DAD (Duplicate Address Detection), which is used to detect the
address conflicts. In the DAD process, the IPv6 address may in three different
status:
Normal: Indicates that the link-local address passes the DAD and can be used
normally.
Try: Indicates that the link-local address is in the progress of DAD and cannot be
used right now.
Repeat: Indicates that the link-local address is duplicated, this address is already
used by another node and cannot be used by the interface.
Enable global With this option enabled, the interface automatically generates a global address
address auto and other information according to the address prefix and other configuration
configuration via parameters from the received RA (Router Advertisement) message.
RA message
Enable global With this option enabled, the switch will try to obtain the global address from the
address auto DHCPv6 Server.
configuration via
DHCPv6 Server
Address Format Select the global address format according to your needs.
EUI-64: Indicates that you only need to specify an address prefix, then the
system will create a global address automatically.
Not EUI-64: Indicates that you have to specify an intact global address.
Global Address When EUI-64 is selected, please input the address prefix here, otherwise, please
input an intact IPv6 address here.
search engine
System Info Configurations
to manually assign an IPv6 global
User Guide 32