TP-Link Jetstream T1500G-8T User Manual page 541

Configuring Access Security
Step 4
Step 5
Step 6
Step 7
The following example shows how to set the session timeout as 9, set the maximum
admin number as 6, and set the maximum operator number as 2, the maximum power user
number as 2, the maximum user number as 2.
Switch#configure
Switch(config)#ip http server
Switch(config)#ip http session timeout 9
Switch(config)#ip http max-user 6 2 2 2
Switch(config)#show ip http configuration
HTTP Status:
HTTP Port:
HTTP Session Timeout:
HTTP User Limitation:
HTTP Max Users as Admin:
HTTP Max Users as Operator:
HTTP Max Users as Power User:
HTTP Max Users as User:
Switch(config)#end
Downloaded from ManualsNet.com
ip http max-users admin-num operator-num poweruser-num user-num
Specify the maximum number of users that are allowed to connect to the HTTP server. The
total number of users should be no more than 16.
admin-num : Enter the maximum number of users whose access level is Admin. The valid values
are from 1 to 16.
operator-num : Enter the maximum number of users whose access level is Operator. The valid
values are from 0 to 15.
poweruser-num : Enter the maximum number of users whose access level is Power User. The
valid values are from 0 to 15.
user-num : Enter the maximum number of users whose access level is User. The valid values
are from 0 to 15.
show ip http configuration
Verify the configuration information of the HTTP server, including status, session timeout,
access-control, max-user number and the idle-timeout, etc.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
search engine
Enabled
80
9
Enabled
6
2
2
2
Access Security Configurations
User Guide 518