Configuring 802.1X On Ports - TP-Link Jetstream T1500G-8T User Manual

Configuring 802.1x
2) Click Apply.

2.1.3 Configuring 802.1x on Ports

Choose the menu SECURITY > 802.1x > Port Config to load the following page.
Figure 2-7 Port Config
Follow these steps to configure 802.1x authentication on the desired port:
1) Select one or more ports and configure the following parameters:
Downloaded from ManualsNet.com
VLAN Enable or disable the 802.1x VLAN assignment feature. 802.1x VLAN assignment is
Assignment a technology allowing the RADIUS server to send the VLAN assignment to the port
when the port is authenticated.
If the assigned VLAN does not exist on the switch, the switch will create the related
VLAN automatically, add the authenticated port to the VLAN and change the PVID
based on the assigned VLAN.
If the assigned VLAN exists on the switch, the switch will directly add the
authenticated port to the related VLAN and change the PVID instead of creating a
new VLAN.
If no VLAN is supplied by the RADIUS server or if 802.1x authentication is disabled,
the port will be in its original VLAN after successful authentication.
Status Enable 802.1x authentication on the port.
search engine
802.1x Configuration
User Guide 560