Configuring DHCP Filter
4.1.3 Using the GUI
1) Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Basic Config to load the
following page. Enable DHCPv4 Filter globally and click Apply. Select all ports, change
Status as Enable, and click Apply.
Figure 4-2 Basic Config
2) Choose the menu SECURITY > DHCP Filter > DHCPv4 Filter > Legal DHCPv4 Servers
and click
number of the legal DHCPv4 server. Click Create.
Downloaded from
ManualsNet.com
to load the following page. Specify the IP address and connected port
search engine
Configuration Examples
User Guide
709