Configuring Legal Dhcpv6 Servers - TP-Link Jetstream T1500G-8T User Manual

Configuring DHCP Filter
Status
Rate Limit
Decline Protect
LAG
3) Click Apply.

3.1.2 Configuring Legal DHCPv6 Servers

Choose the menu SECURITY > DHCP Filter > DHCPv6 Filter > Legal DHCPv6 Servers and
click
Figure 3-2 Adding Legal DHCPv6 Server
Follow these steps to add a legal DHCPv6 server:
1) Configure the following parameters:
Server IPv6
Address
Server Port
2) Click Create.
Downloaded from ManualsNet.com
Enable or disable DHCPv6 Filter feature on the port.
Select to enable the rate limit feature and specify the maximum number of
DHCPv6 packets that can be forwarded on the port per second. The excessive
DHCPv6 packets will be discarded.
Select to enable the decline protect feature and specify the maximum number
of DHCPv6 Decline packets that can be forwarded on the port per second. The
excessive DHCPv6 Decline packets will be discarded.
Displays the LAG that the port is in.
Note:
The member port of an LAG (Link Aggregation Group) follows the configuration of the LAG and not its
own. The configurations of the port can take effect only after it leaves the LAG.
to load the following page.
Specify the IP address of the legal DHCPv6 server.
Select the port that the legal DHCPv6 server is connected.
search engine
DHCPv6 Filter Configuration
User Guide 704