TP-Link Jetstream T1500G-8T User Manual page 122

Managing Physical Interfaces
Step 3
Step 4
Step 5
Step 6
The following example shows how to add ports 1/0/1-3 and LAG 4 to the forwarding list of
port 1/0/5:
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/5
Switch(config-if)#port isolation gi-forward-list 1/0/1-3 po-forward-list 4
Switch(config-if)#show port isolation interface gigabitEthernet 1/0/5
Port
----
Gi1/0/5 N/A
Switch(config-if)#end
Switch#copy running-config startup-config
Downloaded from ManualsNet.com
port isolation { [fa-forward-list fa-forward-list ] [gi-forward-list gi-forward-list ] [te-
forward-list te-forward-list ] [ po-forward-list po-forward-list ] }
Add ports or LAGs to the forwarding port list of the isolated port. It is multi-optional.
fa-forward-list / gi-forward-list / te-forward-list
po-forward-list: Specify the forwarding LAGs.
show port isolation interface { fastEthernet port | gigabitEthernet port | ten-
gigabitEthernet port | port-channel port-channel }
Verify the Port Isolation configuration of the specified port.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
LAG Forward-List
--- -----------------------
Gi1/0/1-3,Po4
search engine
Port Isolation Configurations
: Specify the forwarding Ethernet ports.
User Guide 99