Telnet Login - TP-Link Jetstream T1500G-8T User Manual

Accessing the Switch
3.2

Telnet Login

The switch supports Login Local Mode for authentication by default.
Login Local Mode: Username and password are required, which are both admin by default.
The following steps show how to manage the switch via the Login Local Mode:
1) Make sure the switch and the PC are in the same LAN (Local Area Network). Click Start
and type in cmd in the Search bar and press Enter.
Figure 3-3 Open the cmd Window
2) Type in telnet 192.168.0.1 in the cmd window and press Enter.
Figure 3-4 Log In to the Switch
3) Type in the login username and password (both admin by default). Press Enter and you
will enter User EXEC Mode.
Figure 3-5 Enter User EXEC Mode
Downloaded from ManualsNet.com
Note:
The first time you log in, change the password to better protect your network and devices.
search engine
Command Line Interface Access
User Guide 11