TP-Link Jetstream T1500G-8T User Manual page 375

Configuring Spanning Tree
3) Configure the region name as 1, the revision number as 100; map VLAN101-VLAN103
to instance 1; map VLAN104-VLAN106 to instance 2; configure the priority of Switch C
in instance 2 as 0 to set it as the root bridge in instance 2:
Switch(config)#spanning-tree mst configuration
Switch(config-mst)#name 1
Switch(config-mst)#revision 100
Switch(config-mst)#instance 1 vlan 101-103
Switch(config-mst)#instance 2 vlan 104-106
Switch(config-mst)#exit
Switch(config)#spanning-tree mst instance 2 priority 0
Switch(config)#end
Switch#copy running-config startup-config
Verify the Configurations
■ Switch A
Verify the configurations of Switch A in instance 1:
Switch(config)#show spanning-tree mst instance 1
MST-Instance 1
Root Bridge
Priority
Address
Internal Cost : 400000
Root Port
Designated Bridge
Priority
Address
Local Bridge
Priority
Address
Downloaded from ManualsNet.com
: 0
: 00-0a-eb-13-12-ba
: 1
: 0
: 00-0a-eb-13-12-ba
: 32768
: 00-0a-eb-13-23-97
search engine
Configuration Example for MSTP
User Guide 352