Restoring The Configuration Of The Switch; Backing Up The Configuration File - TP-Link Jetstream T1500G-8T User Manual

Managing System

4.2.2 Restoring the Configuration of the Switch

Follow these steps to restore the configuration of the switch:
Step 1
Step 2
The following example shows how to restore the configuration file named file1 from the
TFTP server with IP address 192.168.0.100.
Switch>enable
Switch#copy tftp startup-config ip-address 192.168.0.100 filename file1
Start to load user config file...
Operation OK! Now rebooting system...

4.2.3 Backing up the Configuration File

Follow these steps to back up the current configuration of the switch in a file:
Step 1
Step 2
The following example shows how to backup the configuration file named file2 to TFTP
server with IP address 192.168.0.100.
Switch>enable
Switch#copy startup-config tftp ip-address 192.168.0.100 filename file2
Start to backup user config file...
Downloaded from ManualsNet.com
enable
Enter privileged mode.
copy tftp startup-config ip-address ip-addr filename name
Download the configuration file to the switch from TFTP server.
ip-addr : Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are
supported.
name : Specify the name of the configuration file to be downloaded.
Note:
It will take some time to restore the configuration. Please wait without any operation.
enable
Enter privileged mode.
copy startup-config tftp ip-address ip-addr filename name
Back up the configuration file to TFTP server.
ip-addr : Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are
supported.
name : Specify the name of the configuration file to be saved.
search engine
System Tools Configurations
User Guide 57