TP-Link Jetstream T1500G-8T User Manual page 92

Managing System
Figure 6-5 Configuring System Power Limit
2) In the Port Config section, select one or more ports and configure the following two
parameters: Time Range and PoE Profile. Click Apply and the PoE parameters of the
selected PoE Profile, such as PoE Status and PoE Priority, will be displayed in the table.
Downloaded from ManualsNet.com
Unit Displays the unit number.
System Power Specify the maximum power the PoE switch can supply.
Limit
PoE Status Displays the PoE function for the corresponding port. The port can supply
power to the PD when its status is enable.
PoE Priority Displays the priority level for the corresponding port. When the supply power
exceeds the system power limit, the switch will power off PDs on low-priority
ports to ensure stable running of other PDs.
Power Limit Displays the maximum power the corresponding port can supply.
Power Limit Value Displays the power limit value.
(0.1–30.0 W)
Time Range Select a time range, then the port will supply power only during the time range.
For how to create a time range, refer to
PoE Profile Select the PoE profile for the desired port. If one profile is selected, you will not
be able to modify PoE status, PoE priority or power limit manually.
Power (W) Displays the port's real-time power supply.
Current (mA) Displays the port's real-time current.
Voltage (V) Displays the port's real-time voltage.
PD Class Displays the class the linked PD belongs to.
Power Status Displays the port's real-time power status.
search engine
PoE Configurations (Only for Certain Devices)
Time Range Configuration.
User Guide 69