Disable Telnet Login - TP-Link Jetstream T1500G-8T User Manual

Accessing the Switch
5) Go to Connection > SSH > Auth. Click Browse to download the private key file to
PuTTY. Click Open to start the connection and negotiation.
Figure 3-14 Download the Private Key to PuTTY
6) After negotiation is completed, enter the username to log in. If you can log in without
entering the password, the key authentication completed successfully.
Figure 3-15 Log In to the Switch
3.4

Disable Telnet Login

You can shut down the Telnet function to block any Telnet access to the CLI interface.
■ Using the GUI:
Go to SECURITY > Access Security > Telnet Config, disable the Telnet function and click
Apply.
Downloaded from ManualsNet.com
Note:
The first time you log in, change the password to better protect your network and devices.
search engine
Command Line Interface Access
User Guide 16