Configuring Layer 2 Multicast
10
Show status of IGMP Snooping globally, on the ports and in the VLAN:
Switch(config)#show ip igmp snooping
IGMP Snooping
IGMP Version
Header Validation
Global Authentication Accounting
Enable Port : Gi1/0/1-4
Enable VLAN:10
7.2
Example for Configuring MVR
7.2.1 Network Requirements
Host B, Host C and Host D are in three different VLANs of the switch. All of them want to
receive multicast streams sent to multicast group 225.1.1.1.
7.2.2 Network Topology
As shown in the following network topology, Host B, Host C and Host D are connected to
port 1/0/1, port 1/0/2 and port 1/0/3 respectively. Port 1/0/1, port 1/0/2 and port 1/0/3
belong to VLAN 10, VLAN 20 and VLAN 30 respectively. Port 1/0/4 is connected to the
multicast network in the upper layer network.
Downloaded from
ManualsNet.com
vlan10
search engine
Gi1/0/5, Gi1/0/6, Gi1/0/7, Gi1/0/8,
...
active
Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4
:Enable
:V3
:Disable
:Disable
Configuration Examples
User Guide
275