Specifying The Scheduler Settings - TP-Link Jetstream T1500G-8T User Manual

Configuring QoS
DSCP remap value 8
DSCP:
DSCP remap value 16 17 18 19 20 21 22 23
DSCP:
DSCP remap value 24 25 26 27 28 29 30 31
DSCP:
DSCP remap value 32 33 34 35 36 37 38 39
DSCP:
DSCP remap value 40 41 42 43 44 45 46 47
DSCP:
DSCP remap value 48 49 50 51 52 53 54 55
DSCP:
DSCP remap value 56 57 58 59 60 61 62 63
Switch(config-if)#end
Switch#copy running-config startup-config

2.2.4 Specifying the Scheduler Settings

Follow these steps to specify the scheduler settings to control the forwarding sequence of
different TC queues when congestion occurs.
Step 1
Step 2
Downloaded from ManualsNet.com
5 10 11 12 13 14 15
---- ---- ---- ---- ---- ---- ---- ----
16 17 18 19 20 21 22 23
---- ---- ---- ---- ---- ---- ---- ----
24 25 26 27 28 29 30 31
---- ---- ---- ---- ---- ---- ---- ----
32 33 34 35 36 37 38 39
---- ---- ---- ---- ---- ---- ---- ----
40 41 42 43 44 45 46 47
---- ---- ---- ---- ---- ---- ---- ----
48 49 50 51 52 53 54 55
---- ---- ---- ---- ---- ---- ---- ----
56 57 58 59 60 61 62 63
---- ---- ---- ---- ---- ---- ---- ----
configure
Enter global configuration mode.
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list |
port-channel port-channel-id | range port-channel port-channel-list }
Enter interface configuration mode.
search engine
Class of Service Configuration
User Guide 456