Viewing Nd Statistics - TP-Link Jetstream T1500G-8T User Manual

Configuring IPv6 IMPB
Step 2
Step 3
Step 4
Step 5
Step 6
The following example shows how to configure port 1/0/1 as trusted port:
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ipv6 nd detection trust
Switch(config-if)#show ipv6 nd detection interface gigabitEthernet 1/0/1
Interface Trusted
---------
Gi1/0/1
Switch(config-if)#end
Switch#copy running-config startup-config

3.2.4 Viewing ND Statistics

On privileged EXEC mode or any other configuration mode, you can use the following
command to view ND statistics:
show ipv6 nd detection statistics
View the ND statistics on each port, including the number of forwarded ND packets and the number of
dropped ND packets.
Downloaded from ManualsNet.com
interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list }
Enter interface configuration mode.
ipv6 nd detection trust
Configure the port as a trusted port, on which the ND packets will not be checked. The
specific ports, such as up-linked ports and routing ports are suggested to be set as trusted
ports.
show ipv6 nd detection interface { fastEthernet port | gigabitEthernet port | ten-
gigabitEthernet port | port-channel port-channel-id }
Verify the global ND Detection configuration of the port.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
LAG
------- ---
Enable N/A
search engine
ND Detection Configuration
User Guide 680