TP-Link Jetstream T1500G-8T User Manual page 497

Configuring QoS
Step 7
Step 8
Step 8
Step 9
The following example shows how to set the interface mode as dot1p, specify the 802.1p
priority as 4, specify the DSCP priority as 10 and enable the CoS override mode for port
1/0/3:
Switch#configure
Switch(config)#auto-voip
Switch(config)#interface gigabitEthernet 1/0/3
Switch(config-if)#auto-voip dot1p 4
Switch(config-if)#auto-voip dscp 10
Switch(config-if)#auto-voip data priority untrust
Switch(config-if)#show auto-voip
Administrative Mode: Enabled
Switch(config-if)#show auto-voip interface
Interface.Gi1/0/1
Auto-VoIP Interface Mode.
Auto-VoIP COS Override.
Auto-VoIP DSCP Value.
Auto-VoIP Port Status.
Interface.Gi1/0/2
Auto-VoIP Interface Mode.
Auto-VoIP COS Override.
Auto-VoIP DSCP Value.
Auto-VoIP Port Status.
Downloaded from ManualsNet.com
show auto-voip
Verify the global state of Auto VoIP.
show auto-voip interface
Verify the Auto VoIP configuration information of ports.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
search engine
Disabled
False
0
Disabled
Disabled
False
0
Disabled
Auto VoIP Configuration
User Guide 474