Enabling Mac Vlan For The Port - TP-Link Jetstream T1500G-8T User Manual

Configuring MAC VLAN
Switch#copy running-config startup-config

2.2.3 Enabling MAC VLAN for the Port

Follow these steps to enable MAC VLAN for the port:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
The following example shows how to enable MAC VLAN for port 1/0/1.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#mac-vlan
Switch(config-if)#show mac-vlan interface
Port
-------
Gi1/0/1 Enable
Gi1/0/2 Disable
...
Switch(config-if)#end
Switch#copy running-config startup-config
Downloaded from ManualsNet.com
configure
Enter global configuration mode.
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list |
port-channel port-channel-id | range port-channel port-channel-list }
Enter interface configuration mode.
mac-vlan
Enable MAC VLAN for the port.
show mac-vlan interface
Verify the configuration of MAC VLAN on each interface.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
STATUS
-----------
search engine
MAC VLAN Configuration
User Guide 160