Configuring The Device Description - TP-Link Jetstream T1500G-8T User Manual

Managing System
MAC Address
System Time
Running Time
Serial Number
Jumbo Frame
SNTP
IGMP Snooping
SNMP
Spanning Tree
DHCP Relay
802.1x
HTTP Server
Telnet
SSH

2.1.2 Configuring the Device Description

Choose the menu SYSTEM > System Info > Device Description to load the following
page.
Figure 2-5 Configuring the Device Description
1) In the Device Description section, configure the following parameters.
Downloaded from ManualsNet.com
Displays the MAC address of the switch.
Displays the system time of the switch.
Displays the running time of the switch.
Displays the serial number of the switch.
Displays whether Jumbo Frame is enabled. You can click Settings to jump to the
Jumbo Frame configuration page.
Displays whether the switch gets system time from NTP Server. You can click
Settings to jump to the System Time configuration page.
Displays whether IGMP Snooping is enabled. You can click Settings to jump to the
IGMP Snooping configuration page.
Displays whether SNMP is enabled. You can click Settings to jump to the SNMP
configuration page.
Displays whether Spanning Tree is enabled. You can click Settings to jump to the
Spanning Tree configuration page.
Displays whether DHCP Relay is enabled. You can click Settings to jump to the DHCP
Relay configuration page.
Displays whether Jumbo Frame is enabled. You can click Settings to jump to the
Jumbo Frame configuration page.
Displays whether HTTP server is enabled. You can click Settings to jump to the HTTP
configuration page.
Displays whether Telnet is enabled. You can click Settings to jump to the Telnet
configuration page.
Displays whether SSH is enabled. You can click Settings to jump to the SSH
configuration page.
search engine
System Info Configurations
User Guide 26