TP-Link Jetstream T1500G-8T User Manual page 774

Configuring DLDP
Switch(config)#dldp
Switch(config)#dldp interval 10
Switch(config)#dldp shut-mode auto
Switch(config)#show dldp
DLDP Global State: Enable
DLDP Message Interval: 10
DLDP Shut Mode: Auto
Switch(config)#end
Switch#copy running-config startup-config
The following example shows how to enable DLDP on port 1/0/1.
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#dldp
Switch(config-if)#show dldp interface
Port
----
Gi1/0/1
Gi1/0/2
...
Switch(config-if)#end
Switch#copy running-config startup-config
Downloaded from ManualsNet.com
DLDP State Protocol State
---------- --------------
Enable Inactive
Disable Initial
search engine
Link State Neighbor State
---------- --------------
Link-Down N/A
Link-Down N/A
DLDP Configuration
User Guide 751