Using The Cli; Configuring Igmp Snooping Globally - TP-Link Jetstream T1500G-8T User Manual

Configuring Layer 2 Multicast
Choose the menu L2 FEATURES > Multicast > IGMP Snooping > Static Group Config and
click
Figure 2-4 Configure Hosts to Statically Join a Group
Follow these steps to configure hosts to statically join a group:
1) Specify the multicast IP address, VLAN ID. Select the ports to be the static member
ports of the multicast group.
2) Click Create.
2.2

Using the CLI

2.2.1 Configuring IGMP Snooping Globally

Follow these steps to configure IGMP Snooping globally:
Step 1
Step 2
Downloaded from ManualsNet.com
to load the following page.
Multicast IP Specify the address of the multicast group that the hosts need to join.
VLAN ID Specify the VLAN that the hosts are in.
Member Ports Select the ports that the hosts are connected to. These ports will become the
static member ports of the multicast group and will never age.
configure
Enter global configuration mode.
ip igmp snooping
Enable IGMP Snooping Globally.
search engine
IGMP Snooping Configuration
User Guide 221