Acl Configuration; Using The Gui; Configuring Time Range; Creating An Acl - TP-Link Jetstream T1500G-8T User Manual

Configuring ACL
2

ACL Configuration

2.1

Using the GUI

2.1.1 Configuring Time Range

Some ACL-based services or features may need to be limited to take effect only during a
specified time period. In this case, you can configure a time range for the ACL. For details
about Time Range configuration, please refer to

2.1.2 Creating an ACL

You can create different types of ACL and define the rules based on source MAC or IP
address, destination MAC or IP address, protocol type, port number and so on.
MAC ACL: MAC ACL uses source and destination MAC address for matching operations.
IP ACL: IP ACL uses source and destination IP address, IP protocols and so on for matching
operations.
Combined ACL: Combined ACL uses source and destination MAC address, and source
and destination IP address for matching operations.
IPv6 ACL: IPv6 ACL uses source and destination IPv6 address for matching operations.
Choose the menu SECURITY > ACL > ACL Config and click
page.
Figure 2-1 Creating an ACL
Follow these steps to create an ACL:
1) Choose one ACL type and enter a number to identify the ACL.
2) (Optional) Assign a name to the ACL
3) Click Create.
Downloaded from ManualsNet.com search engine
Managing System.
.
ACL Configuration
to load the following
User Guide 587