TP-Link Jetstream T1500G-8T User Manual page 535

Configuring Access Security
2) In the Cipher Suite Config section, select the algorithm to be enabled and click Apply.
3) In the Session Config section, specify the Session Timeout and click Apply.
Downloaded from ManualsNet.com
HTTPS Enable or disable the HTTPS function.
HTTPS function is based on the SSL or TLS protocol. It provides a secure
connection between the client and the switch.
Protocol Select the protocol version for HTTPS. Make sure the protocol in use is
Version compatible with that on your HTTPS client.
SSL is a transport protocol. It can provide server authentication, encryption and
message integrity to allow secure HTTP connections.
TLS is a transport protocol upgraded from SSL. It can support a more secure
connection than SSL. TLS and SSL are not compatible with each other.
SSL Version 3.0: Select SSL Version 3.0 as the protocol for HTTPS.
TLS Version 1.0: Select TLS Version 1.0 as the protocol for HTTPS.
TLS Version 1.1: Select TLS Version 1.1 as the protocol for HTTPS.
TLS Version 1.2: Select TLS Version 1.2 as the protocol for HTTPS.
All: Enable all the above protocols for HTTPS. The HTTPS server and client will
negotiate the protocol each time.
Port Specify the port number for HTTPS service.
RSA_WITH_ 128-bit RC4 encryption with MD5 message authentication and RSA key exchange.
RC4_128_MD5
RSA_WITH_ 128-bit RC4 encryption with SHA-1 message authentication and RSA key
RC4_128_SHA exchange.
RSA_WITH_ 56-bit DES encryption with SHA-1 message authentication and RSA key
DES_CBC_SHA exchange.
RSA_WITH_ 168-bit Triple DES encryption with SHA-1 message authentication and RSA key
3DES_EDE_ exchange.
CBC_SHA
ECDHE_WITH_ 128-bit AES in Galois Counter Mode encryption with SHA-256 message
AES_128_GCM_ authentication and elliptic curve Diffie-Hellman key exchange signed with an RSA
SHA256 certificate or ECDSA certificate.
ECDHE_WITH_ 256-bit AES in Galois Counter Mode encryption with SHA-384 message
AES_256_GCM_ authentication and elliptic curve Diffie-Hellman key exchange signed with an RSA
SHA384 certificate or ECDSA certificate.
Session The system will log out automatically if users do nothing within the Session
Timeout Timeout time.
search engine
Access Security Configurations
User Guide 512