Auto Voip Configuration; Using The Gui - TP-Link Jetstream T1500G-8T User Manual

Configuring QoS
5

Auto VoIP Configuration

Configuration Guidelines
■ Before configuring Auto VoIP, you need to enable LLDP-MED on ports and configure
the relevant parameters. For details about LLDP-MED configuration, please refer to
Configuring
■ Auto VoIP provide flexible solutions for optimizing the voice traffic. It can work with
other features such as VLAN and Class of Service to process the voice packets with
specific fields. You can choose and configure Auto VoIP and other features according
to your needs.
5.1

Using the GUI

Choose the menu QoS > Auto VoIP to load the following page.
Figure 5-1 Configuring Auto VoIP
Follow these steps to configure the OUI addresses:
1) In the Global Config section, enable the Auto VoIP function gloablly.
2) In the Port Config section, select the desired and configure the parameters.
Downloaded from ManualsNet.com
LLDP.
search engine
Auto VoIP Configuration
User Guide 471