TP-Link Jetstream T1500G-8T User Manual page 560

Configuring AAA
Switch(config)#radius-server host 192.168.0.10 auth-port 1812 timeout 8 retransmit 3
key 123456
Switch(config)#show radius-server
Server Ip
192.168.0.10
Switch(config)#end
Switch#copy running-config startup-config
■ Adding TACACS+ Server
Follow these steps to add TACACS+ server on the switch:
Step 1
Step 2
Step 3
Step 4
Step 5
The following example shows how to add a TACACS+server on the switch. Set the IP
address of the server as 192.168.0.20, the authentication port as 49, the shared key as
123456, and the timeout as 8 seconds.
Downloaded from ManualsNet.com
Auth Port Acct Port Timeout Retransmit NAS Identifier
1812 1813
configure
Enter global configuration mode.
tacacs-server host ip-address [ port port-id ] [ timeout time ] [ key { [ 0 ] string | 7
encrypted-string } ]
Add the RADIUS server and configure the related parameters as needed.
host ip-address : Enter the IP address of the server running the TACACS+ protocol.
port port-id : Specify the TCP destination port on the TACACS+ server for authentication
requests. The default setting is 49.
timeout time : Specify the time interval that the switch waits for the server to reply before
resending. The valid values are from 1 to 9 seconds and the default setting is 5 seconds.
key { [ 0 ] string | 7 encrypted-string }:
encryption type. 0 indicates that an unencrypted key will follow. 7 indicates that a symmetric
encrypted key with a fixed length will follow. By default, the encryption type is 0.
shared key for the switch and the server, which contains 32 characters at most.
string is a symmetric encrypted key with a fixed length, which you can copy from the
configuration file of another switch. The key or encrypted-key you configured here will be
displayed in the encrypted form.
show tacacs-server
Verify the configuration of TACACS+ server.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
search engine
5 2 000AEB132397 123456
Specify the shared key. 0 and 7 represent the
AAA Configuration
Shared key
string is the
encrypted-
User Guide 537