Configuring The System Ipv6 - TP-Link Jetstream T1500G-8T User Manual

Managing System

2.1.7 Configuring the System IPv6

Choose the menu SYSTEM > System Info > System IPv6 to load the following page.
Figure 2-10 Configuring the System IPv6 Parameters
1) In the System IPv6 Config section, enable IPv6 feature for the interface and configure
the corresponding parameters . Then click Apply.
Downloaded from ManualsNet.com
Management Displays the Management VLAN ID. Only the computers in the management
VLAN ID VLAN can access the management interface of the switch. By default, VLAN 1
owning all the ports is the management VLAN and you can access the switch via
any port
IPv6 Enable Enable the IPv6 feature of the management interface.
Link-local Select the link-local address configuration mode.
Address Mode
Manual: With this option selected, you can assign a link-local address manually.
Auto: With this option selected, the switch generates a link-local address
automatically.
Link-local Enter a link-local address if you choose "Manual" as the Link-Local Address
Address Mode.
search engine
.
System Info Configurations
User Guide 31