TP-Link Jetstream T1500G-8T User Manual page 304

Configuring Layer 2 Multicast
Switch(config)#mvr
Switch(config)#mvr mode dynamic
Switch(config)#mvr vlan 40
Switch(config)#mvr group 225.1.1.1 1
5) Enable MVR for port 1/0/1-4. Configure port 1/0/1-3 as Receiver ports and port 1/0/4
as Source port.
Switch(config)#interface range fastEthernet 1/0/1-3
Switch(config-if-range)#mvr
Switch(config-if-range)#mvr type receiver
Switch(config-if-range)#exit
Switch(config)#interface fastEthernet 1/0/4
Switch(config-if)#mvr
Switch(config-if)#mvr type source
Switch(config-if)#exit
6) Save the settings.
Switch(config)#end
Switch#copy running-config startup-config
Verify the Configurations
Show the brief information of all VLANs:
Switch(config)#show vlan brief
VLAN
-------
1
10
20
30
40
Show the brief information of MVR:
Switch(config)#show mvr
MVR
Downloaded from ManualsNet.com
Name
----------------
System-VLAN
VLAN10
VLAN20
VLAN30
VLAN40
search engine
Status Ports
--------- ----------------------------------------
active Gi1/0/4, Gi1/0/5, Gi1/0/6, Gi1/0/7,
...
active Gi1/0/1
active Gi1/0/2
active Gi1/0/3
active Gi1/0/4
:Enable
Configuration Examples
User Guide 281