Configuring Nd Detection On Ports; Viewing Nd Statistics - TP-Link Jetstream T1500G-8T User Manual

Configuring IPv6 IMPB

3.1.3 Configuring ND Detection on Ports

Choose the menu SECURITY > IPv6 IMPB > ND Detection >Port Config to load the
following page.
Figure 3-2 ND Detection on Port
Follow these steps to configure ND Detection on ports:
1) Select one or more ports and configure the parameters.
2) Click Apply.

3.1.4 Viewing ND Statistics

You can view the number of the illegal ND packets received on each port, which facilitates
you to locate the network malfunction and take the related protection measures.
Downloaded from ManualsNet.com
VLAN ID Displays the VLAN ID.
Status Enable or disable ND Detection on the VLAN.
Log Status Enable or disable Log feature on the VLAN. With this feature enabled, the switch
generates a log when an illegal ND packet is discarded.
Port Displays the port number.
Trust Status Enable or disable this port to be a trusted port. On a trusted port, the ND packets
are forwarded directly without checked. The specific ports, such as up-link ports
and routing ports are suggested to be set as trusted.
LAG Displays the LAG that the port is in.
search engine
ND Detection Configuration
User Guide 677