Access Security Configurations; Using The Gui; Configuring The Access Control Feature - TP-Link Jetstream T1500G-8T User Manual

Configuring Access Security
2

Access Security Configurations

With access security configurations, you can:
■ Configure the Access Control feature
■ Configure the HTTP feature
■ Configure the HTTPS feature
■ Configure the SSH feature
■ Configure the Telnet function
2.1

Using the GUI

2.1.1 Configuring the Access Control Feature

Choose the menu SECURITY > Access Security > Access Control to load the following
page.
Figure 2-1 Configuring the Access Control
1) In the Global Config section, enable Access Control, select one control mode and click
Apply.
Downloaded from ManualsNet.com
Control Mode Choose how to control the users' access.
IP-based: Only the users within a certain IP-range can access the switch via the
specified interfaces.
MAC-based: Only the users with a certain MAC address can access the switch via
the specified interfaces.
Port-based: Only the users who are connected to certain ports can access the
switch via the specified interfaces.
search engine
Access Security Configurations
User Guide 506