Sdm Template Configuration; Using The Gui - TP-Link Jetstream T1500G-8T User Manual

Managing System
7

SDM Template Configuration

7.1

Using the GUI

Choose the menu SYSTEM > SDM Template to load the following page.
Figure 7-1 Configuring SDM Template
In SDM Template Config section, select one template and click Apply. The setting will be
effective after the switch is rebooted.
Current Template
Next Template
Select Next
Template
The Template Table displays the resources allocation of each template.
SDM Template
IP ACL Rules
Downloaded from ManualsNet.com
Displays the template currently in effect.
Displays the template that will be effective after the reboot.
Select the template that will be effective after the next reboot.
Default: Select the template of default. It gives balance to the IP ACL rules and MAC
ACL rules.
EnterpriseV4: Select the template of enterpriseV4. It maximizes system resources
for IP ACL rules and MAC ACL rules.
EnterpriseV6: Select the template of enterpriseV6. It allocates resources to IPv6
ACL rules.
Displays the name of the templates.
Displays the number of IP ACL Rules including Layer 3 ACL Rules and Layer 4 ACL
Rules.
search engine
SDM Template Configuration
User Guide 75