Mvr; Mvr Config - TP-Link T3700G-28TQ User Manual

Add IP-range

Start IP:
End IP:
IP-range Table

Select:
Index:
Start IP:
End IP:

MVR

9.3
Multicast VLAN Registration (MVR) allows a single multicast VLAN to be shared for multicast
member ports in different VLANs. In IGMP snooping, if member ports are in different VLANs, a
copy of the multicast streams is sent to each VLAN that has member ports. While MVR
provides a dedicated multicast VLAN to forward multicast traffic over the layer 2 network, to
avoid duplication of multicast streams for clients in different VLANs. Clients can dynamically
join or leave the multicast VLAN without interfering with their relationships in other VLANs.
Only one MVR multicast VLAN per switch or per stack is supported.

9.3.1 MVR Config

Use this page to view and configure the global settings for Multicast VLAN Registration (MVR).
Choose the menu Multicast→MVR→MVR Config to load the following page.
Deny: Only deny the IP address within the IP range and

permit others.
Enter the start IP address of the IP range.
Enter the end IP address of the IP range.
Select to delete the IP range entry.
Displays the index of the IP range.
Displays the start IP address of the IP range.
Displays the end IP address of the IP range.
Figure 9-16 MVR Global Config
151