Example For Configuring Mvr; Network Requirements; Network Topology - TP-Link T2600G Series User Manual

Configuring Layer 2 Multicast
VLAN
-----
1
10
Show status of IGMP Snooping globally, on the ports and in the VLAN:
Switch(config)#show ip igmp snooping
IGMP Snooping
IGMP Version
Header Validation
Global Authentication Accounting
Enable Port : Gi1/0/1-4
Enable VLAN:10

7.2 Example for Configuring MVR

7.2.1 Network Requirements

Host B, Host C and Host D are in three different VLANs of the switch. All of them want to
receive multicast streams sent to multicast group 225.1.1.1.

7.2.2 Network Topology

As shown in the following network topology, Host B, Host C and Host D are connected to
port 1/0/1, port 1/0/2 and port 1/0/3 respectively. Port 1/0/1, port 1/0/2 and port 1/0/3
belong to VLAN 10, VLAN 20 and VLAN 30 respectively. Port 1/0/4 is connected to the
multicast network in the upper layer network.
Name
--------------------
System-VLAN
vlan10
Status Ports
--------- ----------------------------------------
active Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4,
Gi1/0/5, Gi1/0/6, Gi1/0/7, Gi1/0/8,
...
active Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4
:Enable
:V3
:Disable
:Disable
Configuration Examples
User Guide 360