Igmp Snooping Configuration; Using The Gui; Configuring Igmp Snooping Globally - TP-Link T1500 Series User Manual

Configuring Layer 2 Multicast
2

IGMP Snooping Configuration

To complete IGMP Snooping configuration, follow these steps:
1) Enable IGMP Snooping globally and configure the global parameters.
2) Configure IGMP Snooping for VLANs.
3) Configure IGMP Snooping for ports.
4) (Optional) Configure hosts to statically join a group.
Note:
IGMP Snooping takes effect only when it is enabled globally, in the corresponding VLAN and port at
the same time.
2.1

Using the GUI

2.1.1 Configuring IGMP Snooping Globally

Choose the menu L2 FEATURES > Multicast > IGMP Snooping > Global Config to load the
following page.
Figure 2-1 Configure IGMP Snooping Globally
Follow these steps to configure IGMP Snooping globally:
1) In the Global Config section, enable IGMP Snooping globally and configure the global
parameters.
IGMP Snooping Enable or disable IGMP Snooping globally.
IGMP Snooping Configuration
Configuration Guide 217