Inspecting And Adjusting The Selector Lever Control Cable - Skoda FABIA II 2007 Workshop Manual

Selector lever in position N, button on selector lever pressed and
ignition switched on
• Brake pedal is not operated.
The selector lever is locked and cannot be moved out of position
N. The selector lever lock solenoid blocks the selector lever.
• Brake pedal is operated.
The selector lever lock solenoid releases the selector lever. It is
possible to engage a driving gear position.
Note
Shifting out of the position N to D by activating the brake pedal is
also possible without pressing the button on the selector lever.
From position N to R the button on the selector lever also must
be pressed.
Selector lever in position D, ignition switched on
The selector lever is locked and cannot be shifted from position
D to position S.
• Button pressed on selector lever.
The selector lever is released and can be shifted from position D
to position S.
Selector lever in position D, ignition and light switched on
• Guide selector lever in the Tiptronic gear.
The light for D on the lamp for selector lever scale illumination -
L101- must go out and the + and – symbols should light up.
When the selector lever is shifted to the Tiptronic gate, the se‐
lector lever position indicator - Y6- in the dash panel insert must
change from P R N D S to 7 6 5 4 3 2 1.
• Shift selector lever in the Tiptronic gear to + and –.
The display of the selector lever position 7 6 5 4 3 2 1 in the dash
panel insert must indicate (select) a higher or a lower gear when
shifting the selector lever to + or to –.
If the gearshift mechanism does not function as described:

– Inspecting and adjusting the selector lever control cable

⇒ "2.3 Inspecting and adjusting the selector lever control ca‐
ble", page 105 .
– Check ignition key anti-removal lock
⇒ "2.4 Check the function of the ignition key removal lock",
page 108 .
Selector lever position indicator
If all parts of the selector lever position display are lit, it indicates
that the gearbox is in emergency operation mode.
2.3 Inspecting and adjusting the selector
lever control cable
• The gearshift mechanism is checked
⇒ "2.2 Inspecting the gearshift mechanism", page 104
– Pull selector lever back approx. 5 mm out of position P with
the button pressed, and hold, but do not shift into position R.
– Release the selector lever.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
.
105
2. Shift mechanism