Mechanical Alkaline Cleaning And Thermal; Disinfecting; Inspection; Visual Inspection - Braun Aesculap TSPACE PEEK Instructions For Use/Technical Description

3.10.3 Mechanical alkaline cleaning and thermal disinfecting
Machine type: single-chamber cleaning/disinfection device without ultrasound
Phase Step
I Prerinse
II Cleaning
III Intermediate rinse
IV Thermal disinfec-
tion
V Drying
D–W: Drinking water
FD–W: Fully desalinated water (demineralized, low microbiological contamination: drinking water quality
at least)
*Recommended: BBraun Helimatic Cleaner alcaline
►
Check visible surfaces for residues after mechanical
cleaning/disinfecting.

3.11 Inspection

►
Allow the product to cool down to room tempera-
ture.
►
Dry the product if it is wet or damp.

3.11.1 Visual inspection

►
Ensure that all soiling has been removed. In partic-
ular, pay attention to mating surfaces, hinges,
shafts, recessed areas, drill grooves and the sides of
the teeth on rasps.
►
If the product is dirty: repeat the cleaning and dis-
infection process.
►
Check the product for damage, e.g. insulation or
corroded, loose, bent, broken, cracked, worn or
severely scratched and fractured components.
►
Check the product for missing or faded labels.
►
Check the products with long, slim shapes (in par-
ticular rotating instruments) for deformities.
►
Check the surfaces for rough spots.
T t Water
[°C/°F] [min] quality
<25/77 3 D–W
55/131 10 FD–W
>10/50 1 FD-W
90/194 5 FD-W
- - -
Chemical
-
■
Concentrate, alkaline:
– pH = 13
– <5 % anionic surfactant
■
0.5 % working solution
– pH = 11*
-
-
According to the program for cleaning
and disinfection device
►
Check the product for burrs that could damage tis-
sue or surgical gloves.
►
Check the product for loose or missing parts.
►
Immediately put aside damaged or inoperative
products and send them to Aesculap Technical Ser-
vice, see Technical service.
en
17