Connectors And Indicators; Slots; Slot Order (Important); Leds - Mitel MiVoice Business Installation Manual

C 3
HAPTER

Connectors and Indicators

: The EX Controller is highly customizable in the sense that it may have one or several types of ports,
NOTE
or none. Therefore the following image may not exactly represent your EX Controlle r.

Slots

The following graphic indicates the slots on the EX controller:

Slot Order (Important)

The order and location the cards are installed is crucial to the controller to work properly. The numbers in
the following graphic indicate the slots and order in which they must be installed.
• Slot order is indicated on the front of the controller (left bottom corner)
• Always start from slot 1
• No empty slots must be left empty between two cards
Controller with PRI and Analog Ports
• All PRI cards must be installed first, starting from slot 1
• DSP card must be installed in the next available slot
• Analog cards are installed last
Controller with analog ports only (no PRI ports)
• DSP card must be installed in slot 1
• Analog cards are installed last

LEDS

#
1
LED
Unit with Power 1
connector only
Behaviour
Green, blinking, 1 cycle
per second, 50% duty
Green, steady ON
C I
ONNECTORS AND NDICATORS
G S
ETTING TARTED
Condition
Unit is being restarted
Unit is restarted
6