8. PERIPHERAL CONTROL CARD
Brief
Major
Facilities
Description
8.01
The Peripheral Control card is located in slot 20 of an analog
peripheral shelf. It controls the analog cards on instructions
from the Main Control Card. Figure 8-l shows the front faces of the
Peripheral
Control
Card,
the Main Control Card.
Components
Major
components
8.02
clude:
l
6809 microprocessor running at 1.33 MHz
l
Memory: 8K EPROM, 32K RAM
l
Peripheral
Clock
8.03
Facilities for the Peripheral Control Card include:
Peripheral I/O Timing Generator for the bays it controls
Peripheral
Address
Power Fail Monitor: a local bay reset is generated if any power
rail drops below 95%. of its nominal level.
Status Flag Buffer.
Circuit
the
Scanner
and
Digital
provided
by
the
Peripheral
Oscillator.
Decoder
Card
Descriptions
Interface
cards
and
Control
Card
in-
Page 17