Execution Of Home Position Return - Mitsubishi Electric Q Series Programming Manual

7 AUXILIARY AND APPLIED FUNCTIONS

7.3.16 Execution of home position return

[Control details]
[Program]
[Cautions]
The home position return is executed using the CHGA instruction.
(1) Home position return is executed by the home position return method specified
with the home position return data (Refer to Section 7.3.1).
Refer to the following sections for details of the home position return methods :
• Proximity dog type 1...................
• Proximity dog type 2...................
• Count type 1...............................
• Count type 2...............................
• Count type 3...............................
• Data set type 1............................
• Data set type 2............................
• Dog cradle type...........................
• Stopper type 1............................
• Stopper type 2............................
• Limit switch combined type........
A program which executes a home position return using the CHGA instruction is
shown below.
• Program example
Program which execute the home position return of the axis No.4 of the Motion CPU
(CPU No.2) from PLC CPU(CPU No.1).
To self CPU
high speed
interrupt accept
flag from CPU
U3E1\
G48.0
M100
M0 M1
M1
If the home position is not within the in-position range of servo parameter, it does not
mean having reached the home position data and the home position return does not
end in the proximity dog type, count type, data set type 1, dog cradle type, or limit
switch combined type
home position return. In this case, adjusts the in-position range of servo parameter or
position control gain.
Section 7.3.2
Section 7.3.3
Section 7.3.4
Section 7.3.5
Section 7.3.6
Section 7.3.7
Section 7.3.8
Section 7.3.9
Section 7.3.10
Section 7.3.11
Section 7.3.12
Start accept flag
of the axis No.4
(CPU No.2)
U3E1
\G516.0
H3E1
SP.CHGA
7 - 48
"J4" K0 M0 D0
RST M100
Normal complete program
Abnormal complete program