M02 Program End - Mitsubishi Electric Q Series Programming Manual

6 MOTION PROGRAMS FOR POSITIONING CONTROL

6.15.3 M02 Program end

Code
Function Program end
M0
Format
[Explanation]
[Program Example]
M02
2 ;
Executing this command ends an execution of program.
This command is required at the end of a program.
The program which ends a program after positioning control.
G90 ;
G01 X100. Y200. F100. ;
X200. Y300. ;
G00 X0. Y0. ;
M02 ;
%
REMARK
M02 and M30 have the same function.
Program is ended.
(Absolute value command)
(Positioning)
(Positioning)
(Positioning)
(Program end) ..... Also be enabled by M30.
6 - 124