Mitsubishi Electric Q Series Programming Manual page 32

Motion controller

Hide thumbs Also See for Q Series:

Table of Contents

2 POSITIONING CONTROL BY THE MOTION CPU

Positioning control parameter

System settings

System data such as axis allocations

Fixed data by the mechanical system, etc.

Fixed parameters

Data by the specifications of the connected

Servo parameters

servo amplifier

Data required for the acceleration, deceleration

Parameter block

of the positioning control, etc.

Home position return data

Data required for the home position return

JOG operation data

Data required for the JOG operation

ON/OFF pattern data required for the limit

Limit switch output data

switch output function

Manual pulse generator

(Note-1) : The following peripheral devices started by the SW6RN-GSV43P can be

• The personal computer by which WindowsNT

Microsoft Corporation in the United States and/or other countries.

Set and correct using a

peripheral device

2000/Windows

are either registered trademarks or trademarks of

works. (IBM PC/AT campatible)

Servo amplifier

Q173hcpu Q172hcpu