Mitsubishi Electric Q Series Programming Manual page 21

1 OVERVIEW
Motion CPU module/Motion unit
PLC CPU, peripheral devices for PLC program design, I/O
modules and intelligent function module
Operation method for MT Developer
• Multiple CPU system configuration
• Performance specification
SV43
• Design method for common parameter
• Auxiliary and applied functions (common)
When designing the system, provide external protective and safety circuits to ensure safety in
the event of trouble with the Motion controller.
There are electronic components which are susceptible to the effects of static electricity
mounted on the printed circuit board. When handling printed circuit boards with bare hands you
must ground your body or the work bench.
Do not touch current-carrying or electric parts of the equipment with bare hands.
Make parameter settings within the ranges stated in this manual.
Use the program instructions that are used in programs in accordance with the conditions
stipulated in this manual.
Some devices for use in programs have fixed applications: they must be used in accordance
with the conditions stipulated in this manual.
REMARK
For information about the each module, design method for program and parameter,
refer to the following manuals relevant to each module.
Item
Q173HCPU/Q172HCPU User's Manual
Manual relevant to each module
Help of each software
Q173HCPU/Q172HCPU Motion controller
Programming Manual (COMMON)
CAUTION
!
1 - 2
Reference Manual